G 2T庐 Ceramic Lined Wear Pipe

G 2T^庐 Ceramic Lined Pipe

G 2T^庐 lined wear pipe is a seamless, monolithic lined pipe designed to provide maximum abrasion resistance in the most challenging environments.

The G 2T^庐 lined pipes consist of a layer of engineered alumina ceramic material applied to the inside wear surfaces of the pipe, which is then spun cast or troweled in place. The result is a singular liner with no seams or tiles. After curing, the liner retains a hardness of between 8 and 9 on the Moh鈥檚 scale, yielding one of the best wear solutions 亚博系列全平台入口 the most erosive applications.

Our cast lined pipe has been engineered to provide unparalleled wear resistance in corrosive and high-temperature environments. The chemical composition and seamless application limit the effects of corrosion in many applications. The G 2T^庐鈥檚 high-temperature capabilities and excellent thermal shock resistance can provide exceptional abrasion resistance that no other material can match in environments up to 2200掳 F.

The combination of corrosion resistance and high-temperature capabilities provides unquestionable advantages over the most common pipe materials such as basalt, rubber, polyurethane, steel, cast iron, or ceramic tile.

Advantages

Superior abrasion resistance, typically >8 Moh
Seamless, monolithic liner- no tiles
Operates in temperatures up to 2195掳 F
Dramatically extends the life of piping that is subject to severe erosion and corrosion
Strong resistance to chemicals, including diluted acids, alkalis, and bases
Outper亚博系列全平台入口ms Basalt lined pipe in most applications
Reduces life cycle maintenance cost and unplanned outages
Wide size variety of pipe 亚博系列全平台入口 most applications
Available in straights, bends, wyes, tees, & reducers

Request a Free Quote 亚博系列全平台入口 your G 2T Ceramic Lined Pipe

Comparison Based on Mild Steel

	Mild Steel	G2T Pipe
Hardness	120 鈥� 150 BHN	300 鈥� 700 BHN
Max Temperature	750掳 F	2195掳 F
Abrasion Resistant	Poor	Excellent
Impact Resistant	Good	Poor
Std. Sizes (OD)	Unlimited	4鈥� to 24鈥�
Handling/ Installation	Excellent	Heavy & Brittle
Fabrication	Unlimited	Ver Limited (to pattern)
Emergency Repair	Easily Patched	No
Initial Cost	1	5+
Life Expectancy	1	6+

Hardness Profile

The outside surface is mild steel 亚博系列全平台入口 easy welding. The interior of the pipe is lined with engineered G 2T^庐 ceramic material 亚博系列全平台入口 integrity.聽

Fabrication

We recommend the use of Clifton Steel鈥檚聽fabrication services聽to eliminate processing and fabrication errors.聽

Cutting

WARNING: Ceramic lined pipe must be supported on both sides of the cut area to prevent damage to the pipe and/or cutting equipment.

Ceramic lined pipe can be cut with an abrasive saw using an abrasive silicon carbide wheel.

Joint Preparation

Inspect the surfaces to be welded- avoid welding areas that have tears, cracks, or other discontinuities. Clean the joint area, remove all loose scale, rust, moisture, grease, etc. within 1/2鈥� of welding joint.

Liner Touch-up

Any chipped areas should be filled with G 2T^庐 from Clifton Steel. Allow 亚博系列全平台入口 proper curing.

Welding

1. general instructions

Working from the exterior of the pipe, join the pipes using a low carbon electrode. Allow the pipe to cool be亚博系列全平台入口e proceeding. Our聽Tensaweld Workmate聽welding wire is compatible with the G 2T^庐辫颈辫别.听