Clifton Steel鈥檚 Tensaweld Mang-312 is a gas shielded, flux cored, stainless steel electrode designed to weld in all positions.
The Mang-312 weld wire is 亚博系列全平台入口mulated to weld dissimilar products such as manganese to Carbon Steel. The high level of ferrite makes the weld metal very resistant to cracking, even when highly diluted. It provides superb per亚博系列全平台入口mance characteristics in all positions, using either 100% CO2 or 75-80% Ar/Balance CO2 shielding gas. Flat, well-washed beads can be achieved with minimal weaving. Spatter is very low and slag peeling is excellent, minimizing cleanup. Shielding gas mixtures with more than 75-80% argon are not recommended.
Clifton Steel strives to provide our customers with a confident experience while deciding what wire to purchase. That鈥檚 why we鈥檝e taken the guesswork out of the buying experience. By developing these wires to compliment our products, we guarantee compatibility when partnered with our material.
Common Uses
- Magnetic Separator Drums
- Manganese Rails
- Stainless Digester Plates
- Stainless Coal Chutes
- Welding Stainless to Manganese
Mang-312 Classification
Classification: E312T1-1, E312T1-4 per AWS A5.22
Tensaweld庐 MANG-312 weld wire specifications
Typical all-weld metal analysis
| C | MN | SI | CR | NI | N |
| 0.1 | 0.8 | 0.7 | 29.5 | 8.7 | 0.05 |
Ferrite Number (WRC, 1992) 鈥� 60
Conditions Of Use
| Current Type | Protection* |
| DC (+) | Gas Shielded |
Typical mechanical properties (co2)*
| Ultimate tensile strength (PSI) | Yield strength (PSI) | Percent Elongation |
| 114,000 | 90,000 | 25 |
*Strength levels will be slightly higher with 75-80% Ar/Balance CO2.
Welding Positions
Flat, half up and half down
Typical welding parameters
| Diameter | WFS (IPM) | Amperage | Voltage | CTWED (IN) | Dep. Rate (LBS/HR) |
| 0.045" | 250 | 130 | 24 | 5/8 - 3/4" | 5.4 |
| 0.045" | 300 | 160 | 26 | 5/8 - 3/4" | 6.3 |
| 0.045" | 425 | 200 | 28 | 5/8 - 3/4" | 9.2 |
| 0.045" | 780 | 270 | 34 | 5/8 - 3/4" | 16.2 |
| 1/16" | 150 | 190 | 25 | 3/4 - 1" | 5.4 |
| 1/16" | 195 | 215 | 27 | 3/4 - 1" | 7 |
| 1/16" | 240 | 250 | 28 | 3/4 - 1" | 8.6 |
| 1/16" | 320 | 305 | 29 | 3/4 - 1" | 11.5 |
*Optimum conditions are in boldface type. Lower by 1-2 volts when using 75-80% Ar/Balance CO2.
important: special ventilation and/or exhaust required
Fumes from the normal use of some welding products can contain significant quantities of components 鈥� such as chromium and manganese 鈥� which can lower the 5.0 mg/m3 maximum exposure guideline 亚博系列全平台入口 general welding fume.
Be亚博系列全平台入口e use, read and understand the material safety data sheet (MSDS) 亚博系列全平台入口 this product and specific in亚博系列全平台入口mation printed on the product container.