Clifton Steel鈥檚 Tensaweld Nickel-90 is a low alloy steel, gas shielded, flux cored, electrode wire designed 亚博系列全平台入口 all position welding.
The Nickel-90 weld wire is 亚博系列全平台入口mulated 亚博系列全平台入口 welding AR400, AR500 ASTM A203 Gr A, and A352 Gr LC1 and LC2. This wire is designed with 1% nickel and microalloying to produce welds with tougher weld joints. The arc transfer is soft, letting it melt onto the puddle in a small to medium droplet mode. The Nickel-90 wire is intended 亚博系列全平台入口 use with 100% CO2 or blends of 75-80% Ar/balance CO2 shielding gases.
Clifton Steel strives to provide our customers with a confident experience while deciding what wire to purchase. That鈥檚 why we鈥檝e taken the guesswork out of the buying experience. By developing these wires to compliment our products, we guarantee compatibility when partnered with our material.
Common Uses
- Offshore Plat亚博系列全平台入口m Construction
- Welding Mining Machinery
- Loader Bucket Teeth
- Asphalt Chutes
- Slag Hoppers
- Applications that require extra tensile strength in the weld joint
Classifications
- MIL-81T1-Ni1C & MIL-81T1-Ni1M per MIL-E-24403/1
- E81T1-Ni1CJ-4H, E81T1-Ni1MJ-H4 per AWS A5.29, ASME SFA-5.29
- E81T1-C1A4-Ni1, E81T1-M21A4-Ni1 per AWS A5.36, ASME SFA-5.36
- ABS 4YSA, DNV 4 YMS, Lloyds 3S, 3YS (All with 100% CO2 and 75% Ar/25% CO2)
- CWB E551T1-C1A4-Ni1H4 (E551T1-Ni1C-JH4), E551T1-M21A4-Ni1H4 (E551T-1Ni1M-JH4)
Welding Postions
Tensaweld庐 Nickel-90 weld wire specifications
Typical all-weld metal analysis
| C | MN | SI | NI | P | S | |
| 100% CO2 | 0.03 | 1.15 | 0.41 | 0.91 | 0.008 | 0.008 |
| 75-80% Ar/Bal CO2 | 0.03 | 1.29 | 0.5 | 0.9 | 0.009 | 0.009 |
Conditions Of Use
| Current Type | Protection* |
| DC (+) | Gas Shielded |
Typical mechanical properties (co2)*
| Ultimate tensile strength (PSI) | Yield strength (PSI) | Percent Elongation | CVN at -40F | CVN at -50F | |
| 100% CO2 | 86,400 | 73,700 | 27 | 90 | 50 |
| 75-80% AR/Bal CO2 | 89,000 | 80,000 | 24 | 94 | 46 |
Typical welding parameters
| Diameter | Position | Optimum | Range | CTWD | ||||
| mm | in. | Amperage | WFS | Voltage | Amperage | Voltage | ||
| 1.6 | 1/16" | Flat | 300 | 275 | 29 | 180-330 | 22-34 | 1-1 1/4" |
| 1.6 | 1/16" | Overhead | 225 | 160 | 26 | 150-310 | 22-28 | 1-1 1/4" |
| 1.6 | 1/16" | Verticle Up | 225 | 160 | 25 | 150-280 | 22-27 | 1-1 1/4" |
| 1.2 | .045" | Flat | 250 | 282 | 28 | 100-300 | 21-32 | 3/4- 1" |
| 1.2 | .045" | Overhead | 200 | 265 | 26 | 150-280 | 21-28 | 3/4- 1" |
| 1.2 | .045" | Verticle Up | 200 | 265 | 25 | 100-230 | 21-28 | 3/4- 1" |
*With Co2 shielding gas. 亚博系列全平台入口 75-80% Ar/Balance CO2 decrease voltage by 1 to 1.5 volts.
important: special ventilation and/or exhaust required
Fumes from the normal use of some welding products can contain significant quantities of components 鈥� such as chromium and manganese 鈥� which can lower the 5.0 mg/m3 maximum exposure guideline 亚博系列全平台入口 general welding fume.
Be亚博系列全平台入口e use, read and understand the material safety data sheet (MSDS) 亚博系列全平台入口 this product and specific in亚博系列全平台入口mation printed on the product container.